17th Street Automotive Vehicle Detailing, Car Wash and Vacuum Procedures:

17th Street Automotive Vehicle Detailing, Car Wash and Vacuum Procedures:

Exterior Detailing

1. Pre-Wash:

  - Rinse the vehicle with water to remove loose dirt and debris.

  - Apply a pre-wash foam to break down stubborn grime.

2. Washing:

  - Use a high-quality, pH-neutral car shampoo.

  - Employ a two-bucket method (one for cleaning, soapy water and one for rinsing your mitt) to avoid scratching the paint.

  - Wash the vehicle from top to bottom in sections, rinsing the mitt frequently.

3. Drying:

  - Dry the vehicle with a microfiber towel or a blow dryer that is safe for automotive use.

  - Avoid letting the car air dry, which can cause water spots.

4. Claying:

  - Use a clay bar on the paint to remove any bonded contaminants like tar, sap, or overspray.

  - Keep the surface lubricated while claying to prevent scratches.

5. Polishing:

  - Apply a machine polisher to remove fine scratches and swirls.

  - Choose the appropriate polish and pad combination depending on the paint’s condition.

6. Waxing/Sealing:

  - Apply carnauba wax or a synthetic paint sealant to protect the paint and enhance shine.

  - Allow the wax/sealant to haze and buff off with a clean microfiber towel.

Interior Detailing

1. Vacuuming:

  - Thoroughly vacuum all areas of the interior, including carpets, seats, mats, and trunk.

  - Use various nozzles to reach tight spaces.

2. Shampooing:

  - Shampoo the carpets, floor mats, and fabric seats if applicable.

  - Use a suitable upholstery cleaner and a soft brush for agitation.

3. Leather Treatment:

  - Clean leather surfaces with a pH-neutral leather cleaner.

  - Apply a leather conditioner to keep it supple and prevent cracking.

4. Cleaning Hard Surfaces:

  - Wipe down all hard surfaces (dashboard, door panels, center console) with a microfiber cloth and an appropriate cleaner.

  - Avoid using products that leave greasy residue.

5. Windows:

  - Clean the interior side of windows and mirrors with a streak-free glass cleaner.

  - Use a different microfiber towel from the one used on the body to avoid cross-contamination.

6. Deodorizing:

  - Use an odor eliminator if necessary to remove any lingering smells.

  - Consider placing a subtle air freshener to maintain a fresh scent.

Final Touches

- Inspect the vehicle thoroughly to ensure no areas were missed and all surfaces are clean, polished, and protected.

- Address any specific customer requests and adjust as needed.

This procedure aims to provide a thorough guide to the vehicle detailing those results in a clean, polished, and protected vehicle both inside and out.